Emulsifying / Chopping

BestCut

BestCut

Producing hot dogs, bologna or any other finely comminuted products? The BestCut is a continuous fine-cutting system. The rotor/stator system with cutting rings and cutting heads for fine-cutting, emulsifying, dispersing and homogenizing produces excellent results with the least possible temperature rise. Through-put capacity is up to 9,900 lbs. per hour.

Request Info

AGM

AGM

Designed for high-speed mixing and emulsifying, the AGM features a high-speed knife head at the bottom of the vessel. Designed with a special seal carrier for easy cleaning and complete food safety. Use the AGM for emulsifying liquids, sauces, pastes and other fluid and viscous products. The system can be supplied with heating and cooling capabilities, steam injection, water, oil or milk metering, and much more. Sized from 80 to 600 liters.

Request Info

VAS

VAS

The most versatile mixer, the VAS is built with a mixing, cutting or chopping head on the side of the vessel, and a high-speed mixing arm on the bottom, both equipped with the special seal carrier for complete cleaning and food safety. This system can be used for mixing and emulsifying liquids, sauces, pastes and other fluid and viscous products. Also available with heating and cooling capabilities. Sizes are available up to 1,000 liters.

Request Info

Bowl Cutter

Bowl cutters

The 33- and 45-liter bowl cutters are the cutters for small stores and delicatessens. The CutMix 50-, 70-, 90- and 120-liter volume series allows optimum handling of increasing volume requirements. For industrial production, we offer bowl cutters of the CutMix series with 200-, 360- and 550-liter bowl capacity.

These are the features that distinguish all K+G Wetter high-performance cutters:

  • Most smooth-running machines thanks to a solid, stainless-steel-encased and floor-closed machine frame
  • CutMix series machines start out with a single-piece, grey cast iron frame
  • The cutter shaft is supported by a stable bearing bed, including seal, for trouble-free operation even at maximum speeds
  • Closed underside thanks to a stainless plate welded seamlessly to the frame
  • Easy and quick-to-clean, diagonally arranged outer stainless steel surfaces
  • Stainless materials for all parts that come into contact with food products
  • Temperature recording of the sausage meat by a sensor in the cutting area of the cutter cover
  • CE-conforming and BG-tested

Request Info